| Composition | Mg | Zn | Mn | Al |
| Content | ≈94% | 3%-6% | 0.5-1% | 0.3-0.6% |
| Test Item | Perfrormance Requirements(%) | Measured Value | Decision Result |
| Tensile Strength | ≥255MPa | 255-260MPa | OK |
| Yield Strength | ≥215MPa | 215-220MPa | OK |
| Elongation | ≥6% | 13%-15.5% | OK |
-
-
Magnesium Frame
Magnesium frame
The advantage of Magnesium frame
- Aluminum to Magneisum
- Switching from aluminum alloy production to magnesium production requires NO CHANGE to existing dimensions or structural design
- transportation efficiency has been increased
- Weight reduction of modules → 10–15% more units per truck, the decrease of the delivery fees is ：25% lowering cost per unit of transportation.
- No compromise on Mechanical properties
- Through process optimization and adjustments in manufacturing parameters, performance can be maintained and further enhanced.
- Lower structural load requirements compared to aluminum alloy; module weight can be reduced by approximately 1.5–2 tons per MW. The lighter weight translates to lower handling risks and better suitability for non-standard curved surfaces.
Extrusion press dimension: From 1,000 to 3,000 tons
Electrostatic fluorocarbon powder coating, film thickness: ≥45μm
Sawing, stamping, packaging, delivering